Surface Treatment Division - Removal of Thin Surfaces
Antigo Surface Treatment Division specialises in the removal of thin surfaces, such as slurry sealing and high friction anti skid surfacing by fine milling, leaving the existing surface safe to traffic until a new replacement surface is applied. The operation involves the minimum of the underlying asphalt or concrete surface being removed, whist leaving the surface retextured ready for immediate use or applying a new thin specialist surface directly onto the prepared surface.
Slurry Seal
|
|
Cambridge City Airport
94,000 sq. m. of slurry sealing removed from the main runway @ Cambridge City Airport by fine milling in preparation of receive a new thin surface.
Antigo utilised 3 no. fine milling machines to complete the task in 14 night shifts, leaving the concrete runway operational each day.
|
|
High Friction Surfaces
Maintenance and replacement of anti skid surfacing need to be addressed in many areas across the country as it is becoming apparent, particularly in many urban areas, that such surfaces are deteriorating due to their age and wear.
Antigo Surface Treatment Division is geared to under take this maintenance operation, either by just removing the failed surface, or providing a turn key operation for the removal and replacement of these surfaces.
|
|
A newly applied Anti Skid Surface to a section of carriageway which had been previously fine milled to remove the existing worn out surfacing.
The milling operation can be carried out prior to the surfacing as the milling leaves a fine textured surface which can be used between the removal and replacement operations.
|
|
Antigo fine milling operations can be applied to remove failed surface dressing, and carryout any emergency retexturing that may be necessary to reinstate the pavement surface characteristics, thus instantly improving safety.
|
